Linedriver
Linedriver
DI box
- Instrument feed-through output
- 3-fold attenuation switch (0dB/-20dB/-40dB)
- Wideband balancing transformer
- Groundlift switch
- Robust metal case
289,00 DKK
DI box
- 2 channels
- 3-fold attenuation switch (0/-20/-40dB) per channel
- 1 groundlift switch per channel
- Feed-through outputs
479,00 DKK
Quad DI box
- Transformer coupled, passive switching technology
- 4 separate transmission channels, each equipped with 6.3mm jacks for the feed-through input (INPUT/PARALLEL OUT), 3-fold attenuation switch, very wideband balancing transformer and balanced XLR outputs at the front panel and back panel
- Groundlift can be switched individually for each channel
549,00 DKK
Transformer, for microphone signals.
- Wideband version
- Change from unbalanced to balanced and vice versa
- DC separation to prevent hum loops
- Max. input voltage: 5V (1% THD/40Hz)
94,95 DKK
Line Transformers Due to the full range line transformer with optimized connections for outside applications and various connection jacks, the following level matching facilities are separately provided for each audio channel:
DC separation in audio signal ways
Reduction of the output impedance for long cables, switchable from 1:1/600Omega to 2:1/150Omega
Phase can be switched from 0° to 180° Ground separation via groundlift switch.
All inputs and outputs can be used via 6.3mm jacks and XLR jacks, balanced as well as unbalanced.
Inputs:
Front: 1 x 6.3mm jack, by which the rear input is switched off.
Rear: 1 x XLR jack
Outputs:
Front: 1 x 6.3mm jack, by which the rear output is switched off.
Rear: 1 x XLR jack
- 1-channel version of compact design
489,00 DKK
Line Transformers Due to the full range line transformer with optimized connections for outside applications and various connection jacks, the following level matching facilities are separately provided for each audio channel:
DC separation in audio signal ways
Reduction of the output impedance for long cables, switchable from 1:1/600Omega to 2:1/150Omega
Phase can be switched from 0° to 180° Ground separation via groundlift switch.
All inputs and outputs can be used via 6.3mm jacks and XLR jacks, balanced as well as unbalanced.
Inputs:
Front: 1 x 6.3mm jack, by which the rear input is switched off.
Rear: 1 x XLR jack
Outputs:
Front: 1 x 6.3mm jack, by which the rear output is switched off.
Rear: 1 x XLR jack
- 4-channel version in a 482mm (19) case
""
969,00 DKK
Audio transformer, for line signals, full range version. Suitable for:
- Change from unbalanced to balanced, and vice versa
- DC separation in order to avoid hum loops
- Various level adjustment possibilities when windings are arranged accordingly
94,95 DKK
NEUTRIK XLR/RCA balancing adapters/ground isolators
- Signal will be balanced 1:1 at separated ground, interference and hum loops are prevented
- Ground separation between input signal and output signal
- Input/output impedance: 200Omega
- Black aluminium housing
- For passive DI applications, e.g. from the output of a mixer to a power amplifier
- Not suitable for speaker applications!
NA-2MD0BTX = XLR plug to RCA jack NA-2FD0BTX = XLR inline jack to RCA jack
479,00 DKK
NEUTRIK XLR/6.3mm balancing adapters/ground isolators
- Signal will be balanced 1:1 at separated ground, interference and hum loops are prevented
- Ground separation between input signal and output signal
- Input/output impedance: 200Omega
- Black aluminium housing
- With latching device
- For passive DI applications, e.g. from the output of an instrument to a mixer
- Not suitable for speaker applications!
NA-2MJTX = XLR plug to 6.3mm inline jack NA-2FJTX = XLR inline jack to 6.3mm inline jack
479,00 DKK
NEUTRIK XLR/RCA balancing adapters/ground isolators
- Signal will be balanced 1:1 at separated ground, interference and hum loops are prevented
- Ground separation between input signal and output signal
- Input/output impedance: 200Omega
- Black aluminium housing
- For passive DI applications, e.g. from the output of a mixer to a power amplifier
- Not suitable for speaker applications!
NA-2MD0BTX = XLR plug to RCA jack NA-2FD0BTX = XLR inline jack to RCA jack
479,00 DKK
NEUTRIK XLR/6.3mm balancing adapters/ground isolators
- Signal will be balanced 1:1 at separated ground, interference and hum loops are prevented
- Ground separation between input signal and output signal
- Input/output impedance: 200Omega
- Black aluminium housing
- With latching device
- For passive DI applications, e.g. from the output of an instrument to a mixer
- Not suitable for speaker applications!
NA-2MJTX = XLR plug to 6.3mm inline jack NA-2FJTX = XLR inline jack to 6.3mm inline jack
479,00 DKK
Audio transformer 1:1 for microphone signals, from NEUTRIK.
- Very small design, e.g. also suitable for the installation into connector housings
- Unshielded version with bare wire connections (70mm)
- Wideband version
- Balance adjustment
- Galvanic isolation to avoid/eliminate hum loops
- Max. input voltage: 550mV (1% THD/50Hz)
When installing unshielded transformers into units with interference fields (e.g. power transformers), attention has to be paid to respective shielding measures.
139,00 DKK
Audio transformer 1:3/1:10 for microphone signals, from NEUTRIK.
- Very small design, e.g. also suitable for the installation into connector housings
- Unshielded version with bare wire connections (70mm)
- Wideband version
- Balance adjustment
- Galvanic isolation to avoid/eliminate hum loops
- For e.g. level matching, can be used for the connection of wireless microphone receivers to line inputs
- Max. input voltage: 350mV/380mV (1% THD/50Hz)
When installing unshielded transformers into units with interference fields (e.g. power transformers), attention has to be paid to respective shielding measures.
169,00 DKK
Audio transformer 1:3/1:10 for microphone signals, from NEUTRIK.
- Very small design, e.g. also suitable for the installation into connector housings
- Unshielded version with bare wire connections (70mm)
- Wideband version
- Balance adjustment
- Galvanic isolation to avoid/eliminate hum loops
- For e.g. level matching, can be used for the connection of wireless microphone receivers to line inputs
- Max. input voltage: 350mV/380mV (1% THD/50Hz)
When installing unshielded transformers into units with interference fields (e.g. power transformers), attention has to be paid to respective shielding measures.
169,00 DKK
Professional studio transformer 1:1 for line signals, from NEUTRIK.
- Especially suitable as an input transformer
- Mu-metal shielded version with print connections
- Wideband version
- Balance adjustment
- Galvanic isolation to avoid/eliminate hum loops
- Max. input voltage: 7V (1% THD/50Hz)
879,00 DKK
Professional studio transformer 1:4 for microphone signals, from NEUTRIK.
- Especially suitable as an input transformer
- Mu-metal shielded version with print connections
- Wideband version
- Balance adjustment
- Galvanic isolation to avoid/eliminate hum loops
- For e.g. level matching, can be used for the connection of wireless microphone receivers to line inputs
- Max. input voltage: 2.2V (1% THD/50Hz)
789,00 DKK
