Monteringskasse

AH-101 Profilkasse

Series of Utility CasesMade of extruded profile with insertion grooves for printed circuits in different heights (12/17/22mm distance to the front panel). Exchangeable front panel with protective foil of standard 1.5mm aluminium plate. Mat black ABS plastic side cover. The material surface is anodized and mat etched or black (SW).

Total height: 36.5mm.

AH-101/SW Monteringskasse

Series of Utility CasesMade of extruded profile with insertion grooves for printed circuits in different heights (12/17/22mm distance to the front panel). Exchangeable front panel with protective foil of standard 1.5mm aluminium plate. Mat black ABS plastic side cover. The material surface is anodized and mat etched or black (SW).

Total height: 36.5mm.

AH-102 Profilkasse

Series of Utility CasesMade of extruded profile with insertion grooves for printed circuits in different heights (12/17/22mm distance to the front panel). Exchangeable front panel with protective foil of standard 1.5mm aluminium plate. Mat black ABS plastic side cover. The material surface is anodized and mat etched or black (SW).

Total height: 36.5mm.

AH-102/SW Monteringskasse

Series of Utility CasesMade of extruded profile with insertion grooves for printed circuits in different heights (12/17/22mm distance to the front panel). Exchangeable front panel with protective foil of standard 1.5mm aluminium plate. Mat black ABS plastic side cover. The material surface is anodized and mat etched or black (SW).

Total height: 36.5mm.

AH-103 Profilkasse

Series of Utility CasesMade of extruded profile with insertion grooves for printed circuits in different heights (12/17/22mm distance to the front panel). Exchangeable front panel with protective foil of standard 1.5mm aluminium plate. Mat black ABS plastic side cover. The material surface is anodized and mat etched or black (SW).

Total height: 36.5mm.

AH-103/SW Monteringskasse

Series of Utility CasesMade of extruded profile with insertion grooves for printed circuits in different heights (12/17/22mm distance to the front panel). Exchangeable front panel with protective foil of standard 1.5mm aluminium plate. Mat black ABS plastic side cover. The material surface is anodized and mat etched or black (SW).

Total height: 36.5mm.

AH-61 Profilkasse

Series of Utility CasesMade of extruded profile with insertion grooves for printed circuits in different heights (12/17/22mm distance to the front panel). Exchangeable front panel with protective foil of standard 1.5mm aluminium plate. Mat black ABS plastic side cover. The material surface is anodized and mat etched or black (SW).

Total height: 36.5mm.

AH-61/SW Monteringskasse

Series of Utility CasesMade of extruded profile with insertion grooves for printed circuits in different heights (12/17/22mm distance to the front panel). Exchangeable front panel with protective foil of standard 1.5mm aluminium plate. Mat black ABS plastic side cover. The material surface is anodized and mat etched or black (SW).

Total height: 36.5mm.

AH-62 Profilkasse

Series of Utility CasesMade of extruded profile with insertion grooves for printed circuits in different heights (12/17/22mm distance to the front panel). Exchangeable front panel with protective foil of standard 1.5mm aluminium plate. Mat black ABS plastic side cover. The material surface is anodized and mat etched or black (SW).

Total height: 36.5mm.

AH-62/SW Monteringskasse

Series of Utility CasesMade of extruded profile with insertion grooves for printed circuits in different heights (12/17/22mm distance to the front panel). Exchangeable front panel with protective foil of standard 1.5mm aluminium plate. Mat black ABS plastic side cover. The material surface is anodized and mat etched or black (SW).

Total height: 36.5mm.

AH-63 Profilkasse

Series of Utility CasesMade of extruded profile with insertion grooves for printed circuits in different heights (12/17/22mm distance to the front panel). Exchangeable front panel with protective foil of standard 1.5mm aluminium plate. Mat black ABS plastic side cover. The material surface is anodized and mat etched or black (SW).

Total height: 36.5mm.

AH-63/SW Monteringskasse

Series of Utility CasesMade of extruded profile with insertion grooves for printed circuits in different heights (12/17/22mm distance to the front panel). Exchangeable front panel with protective foil of standard 1.5mm aluminium plate. Mat black ABS plastic side cover. The material surface is anodized and mat etched or black (SW).

Total height: 36.5mm.

PUG-2 Plastkasse

Series of ABS Plastic Cases

• PUG-1, PUG-2 potting cases without cover, with flanges, grey
• PUG-3, PUG-4 without printboard slots or threaded jacks
• PUG-5 to PUG-8 with printboard slots and threaded jacks

PUG-3 Plastkasse

Series of ABS Plastic Cases

• PUG-1, PUG-2 potting cases without cover, with flanges, grey
• PUG-3, PUG-4 without printboard slots or threaded jacks
• PUG-5 to PUG-8 with printboard slots and threaded jacks

PUG-4 Plastkasse

Series of ABS Plastic Cases

• PUG-1, PUG-2 potting cases without cover, with flanges, grey
• PUG-3, PUG-4 without printboard slots or threaded jacks
• PUG-5 to PUG-8 with printboard slots and threaded jacks

PUG-5 Plastkasse

Series of ABS Plastic Cases

• PUG-1, PUG-2 potting cases without cover, with flanges, grey
• PUG-3, PUG-4 without printboard slots or threaded jacks
• PUG-5 to PUG-8 with printboard slots and threaded jacks

PUG-6 Plastkasse

Series of ABS Plastic Cases

• PUG-1, PUG-2 potting cases without cover, with flanges, grey
• PUG-3, PUG-4 without printboard slots or threaded jacks
• PUG-5 to PUG-8 with printboard slots and threaded jacks

PUG-7 Plastkasse

Series of ABS Plastic Cases

• PUG-1, PUG-2 potting cases without cover, with flanges, grey
• PUG-3, PUG-4 without printboard slots or threaded jacks
• PUG-5 to PUG-8 with printboard slots and threaded jacks

PUG-8 Plastkasse

Series of ABS Plastic Cases

• PUG-1, PUG-2 potting cases without cover, with flanges, grey
• PUG-3, PUG-4 without printboard slots or threaded jacks
• PUG-5 to PUG-8 with printboard slots and threaded jacks

RC-121/SW Monteringskasse

482mm (19) Profile Rack CabinetsFully assembled. Especially stable, black plastic-coated 1.2mm sheet steel housing (rear wall 1.5mm) with 4mm standard aluminium front panel. Closed top plate. The inside profile rails accept pc boards and chassis plates.

All cabinets are supplied with silver-coloured anodized handles. Exception: cabinets of 1 rack space.""

RC-131/SW Monteringskasse

482mm (19) Profile Rack CabinetsFully assembled. Especially stable, black plastic-coated 1.2mm sheet steel housing (rear wall 1.5mm) with 4mm standard aluminium front panel. Closed top plate. The inside profile rails accept pc boards and chassis plates.

All cabinets are supplied with silver-coloured anodized handles. Exception: cabinets of 1 rack space.""

RC-132/SW Monteringskasse

482mm (19) Profile Rack CabinetsFully assembled. Especially stable, black plastic-coated 1.2mm sheet steel housing (rear wall 1.5mm) with 4mm standard aluminium front panel. Closed top plate. The inside profile rails accept pc boards and chassis plates.

All cabinets are supplied with silver-coloured anodized handles. Exception: cabinets of 1 rack space.""

RC-133/SW Monteringskasse

482mm (19) Profile Rack CabinetsFully assembled. Especially stable, black plastic-coated 1.2mm sheet steel housing (rear wall 1.5mm) with 4mm standard aluminium front panel. Closed top plate. The inside profile rails accept pc boards and chassis plates.

All cabinets are supplied with silver-coloured anodized handles. Exception: cabinets of 1 rack space.""

RC-134/SW Monteringskasse

482mm (19) Profile Rack CabinetsFully assembled. Especially stable, black plastic-coated 1.2mm sheet steel housing (rear wall 1.5mm) with 4mm standard aluminium front panel. Closed top plate. The inside profile rails accept pc boards and chassis plates.

All cabinets are supplied with silver-coloured anodized handles. Exception: cabinets of 1 rack space.""

RCG-21/SW 19'' rackkabinet 1U

482mm (19) Rack Cabinets

• Steel housing
• Mat black textured coating
• Ventilation slots on the upper side

RCG-22/SW 19'' rackkabinet 2U

482mm (19) Rack Cabinets

• Steel housing
• Mat black textured coating
• Ventilation slots on the upper side

RCG-23/SW 19'' rackkabinet 3U

482mm (19) Rack Cabinets

• Steel housing
• Mat black textured coating
• Ventilation slots on the upper side

RCG-31/SW 19'' rackkabinet 1U

482mm (19) Rack Cabinets

• Steel housing
• Mat black textured coating
• Ventilation slots on the upper side

RCG-32/SW 19'' rackkabinet 2U

482mm (19) Rack Cabinets

• Steel housing
• Mat black textured coating
• Ventilation slots on the upper side

UC-151H/SW Monteringskasse

Metal Utility CasesWith 2mm front panel, stable version with black textured plastic coating. Back panel, side parts, top and bottom plates of 1.2mm sheet steel. With extruded universal profile rails, which can also accept chassis plates.

The cases can be supplied in two basic versions. UC-...H/SW with perforated top plate, series UC-.../SW fully closed. These cases can be supplied 1-2 rack spaces high.

UC-152H/SW Monteringskasse

Metal Utility CasesWith 2mm front panel, stable version with black textured plastic coating. Back panel, side parts, top and bottom plates of 1.2mm sheet steel. With extruded universal profile rails, which can also accept chassis plates.

The cases can be supplied in two basic versions. UC-...H/SW with perforated top plate, series UC-.../SW fully closed. These cases can be supplied 1-2 rack spaces high.

UC-170/SW Monteringskasse

Utility CasesStable metal construction with 2mm aluminium front panel, 2mm aluminium back panel, and 1.5mm sheet steel cases in black. The inside mounting plates offer many possibilities for chassis mounting due to the continuous perforation. Supplied fully assembled.

UC-171/SW Monteringskasse

Utility CasesStable metal construction with 2mm aluminium front panel, 2mm aluminium back panel, and 1.5mm sheet steel cases in black. The inside mounting plates offer many possibilities for chassis mounting due to the continuous perforation. Supplied fully assembled.

UC-174/SW Monteringskasse

Utility CasesStable metal construction with 2mm aluminium front panel, 2mm aluminium back panel, and 1.5mm sheet steel cases in black. The inside mounting plates offer many possibilities for chassis mounting due to the continuous perforation. Supplied fully assembled.

UC-178/SW Monteringskasse

Utility CasesStable metal construction with 2mm aluminium front panel, 2mm aluminium back panel, and 1.5mm sheet steel cases in black. The inside mounting plates offer many possibilities for chassis mounting due to the continuous perforation. Supplied fully assembled.

UC-206ALE Monteringskasse

Series of Profile Utility CasesAll panels are of anodized aluminium, the cover plate is not perforated. Front and back panels of all models are 1mm thick. The cases are supplied fully assembled.

UC-207ALE Monteringskasse

Series of Profile Utility CasesAll panels are of anodized aluminium, the cover plate is not perforated. Front and back panels of all models are 1mm thick. The cases are supplied fully assembled.

UC-208ALE Monteringskasse

Series of Profile Utility CasesAll panels are of anodized aluminium, the cover plate is not perforated. Front and back panels of all models are 1mm thick. The cases are supplied fully assembled.

UC-209ALE Monteringskasse

Series of Profile Utility CasesAll panels are of anodized aluminium, the cover plate is not perforated. Front and back panels of all models are 1mm thick. The cases are supplied fully assembled.

UC-252H/SW Monteringskasse

Metal Utility CasesWith 2mm front panel, stable version with black textured plastic coating. Back panel, side parts, top and bottom plates of 1.2mm sheet steel. With extruded universal profile rails, which can also accept chassis plates.

The cases can be supplied in two basic versions. UC-...H/SW with perforated top plate, series UC-.../SW fully closed. These cases can be supplied 1-2 rack spaces high.

UC-262H/SW Monteringskasse

Metal Utility CasesWith 2mm front panel, stable version with black textured plastic coating. Back panel, side parts, top and bottom plates of 1.2mm sheet steel. With extruded universal profile rails, which can also accept chassis plates.

The cases can be supplied in two basic versions. UC-...H/SW with perforated top plate, series UC-.../SW fully closed. These cases can be supplied 1-2 rack spaces high.

UCD-140/SW Pultkasse

Low Profile Metal CasesWith flat front edge. Bottom case of sheet steel, side parts of 1.5mm steel, black textured plastic coating. Front panel of 2mm aluminium. An elegant construction with aluminium profile rails for accepting chassis plates and pc boards.

UCD-145/SW Pultkasse

Low Profile Metal CasesWith flat front edge. Bottom case of sheet steel, side parts of 1.5mm steel, black textured plastic coating. Front panel of 2mm aluminium. An elegant construction with aluminium profile rails for accepting chassis plates and pc boards.