Tilbehør CCTV
Tilbehør CCTV
160GB hard disk, in a changing frame, especially suitable for DMR-450.
1.799,00 DKK
Smoked glass dome, for speed colour dome cameras.
- Suitable for EPTZ-500, EPTZ-1000 and EPTZ-3000
- Tinted version for an unobtrusive surveillance
349,00 DKK
Video TV modulator, for inserting video sources into the antenna line.
- Suitable for the connection of video cameras, satellite receivers, games consoles, DVD players or wireless video receivers
- LED indication of the set channel (21-69)
- Integrated test pattern generator with audio signal
- Video input and stereo audio inputs via RCA jacks
- Supplied without PSU, matching PSU PS-300ST is available at option
439,00 DKK
Cable remote control, for pan/tilt CCTV colour dome cameras TVCCD-350 and TVCCD-350COL.
- Up to 99 cameras can be connected
- Functions pan, tilt, and digital zoom can be controlled
- Up to 64 presets can be programmed, sequentially or randomly selected
- 80cm helix connection cable
- Power supply: 12V DC current /100mA
- Dimensions: 140x27x95mm
- RS-485 interface, cable length: 1,200m max.
839,00 DKK
Switch BoxesVideo switch box, with 3 SCART input jacks and 1 SCART output jack.
Simultaneous dubbing between 2 inputs.
179,00 DKK
One-cable transmission system, for distances of up to 500m (cable type RG-59).
- Consisting of 1 transmitter, 1 receiver, power supply cable (1m) for the camera connection as well as 1 PSU (230V~/50Hz/10VA)
- For audio and video signals
- Power supply for camera to be connected is also transmitted via the coaxial cable (12V DC current /500mA)
- LED indication for operation
(Note: Please order 75Omega coaxial connection cable VCC-59 (green) or VCC-59/WS (white) together with this system! Cable length: 100m).
1.149,00 DKK
Video isolation transformer, 75Omega, for DC separation of unbalanced video signals.
- Prevents video-signal distortion caused by ground loops
- Passive, no power supply required
- 15cm connection cable with BNC plug and BNC jack
- Dimensions: 73x21x28mm (w/o cable)
- Weight: 64g
279,00 DKK
Video isolation transformer, 75?, high quality, for DC separation of unbalanced video signals.
- Prevents video-signal distortion caused by ground loops
- Passive, no power supply required
- Wide bandwidth: 20Hz to 11MHz
- High linearity
- 15cm connection cable with BNC plug and BNC jack
- Dimensions: 73x26x28mm (w/o cable)
- Weight: 160g
419,00 DKK
Transmission unit, active - For mounting and laying cables indoors
General specifications: - Cable length for colour signals: 100-1,500m, cable length for B/W signals: 100-2,400m
- Connection between transmitter and receiver via twisted 2-wire leads
- Adjustable amplification of the video signal
- Transmitter and receiver each with BNC jack for the direct connection to a camera, monitor, digital recorder
- Power LED
Please order regulated PSU PS-300ST together with this unit!
649,00 DKK
Transmission unit, active, with surge protection - For laying cables outdoors
- 2 x surge protector VB-240UTP
General specifications: - Cable length for colour signals: 100-1,500m, cable length for B/W signals: 100-2,400m
- Connection between transmitter and receiver via twisted 2-wire leads
- Adjustable amplification of the video signal
- Transmitter and receiver each with BNC jack for the direct connection to a camera, monitor, digital recorder
- Power LED
Please order regulated PSU PS-300ST together with this unit!
919,00 DKK
USB video audio grabber, for digitizing analog signal sources.
- Ideally suited for the connection of camcorders, cameras, and other video equipment to a notebook or PC with high-speed USB2.0 interface
- Incl. extensive software package: driver software, recording software, and grabber software, DVD solution software from Presto!: digital converter, VideoWorks6 in German, English, French, Spanish, Italian
- Numerous video postproduction facilities, also including various effects
- Snap shot function (JPG)
- Direct recording of a DVD, VCD, or SVCD
- Supported formats: PAL, NTSC, and SECAM
- Encodes videos in MPEG-1, MPEG-2, and MPEG-4
- Frame rate up to 25 fps (720x576 pixels, PAL), up to 30 fps (720x480 pixels, NTSC), MPEG-4 with 320x240 pixels
- Power supply via USB interface
- 1 x stereo RCA for audio (for Windows XP via USB), 1 x SVHS, and 1 x RCA for video
Min. system requirementsPentium 4, >1 GHz, 128MB RAM,
819,00 DKK
Network card, for pan focus colour camera VCCXZ-200P.
- RJ45 connection
- Supplied with software CD
2.399,00 DKK
Network card,
for pan focus colour dome cameras VCCP-7575P and VDCDP-7585P.
- RJ45 connection
- Supplied with software CD
2.299,00 DKK
Adapter cable, suitable for camera modules TVCCD-30MA, TVCCD-30MPA, TVCCD-32MACOL. 1.75m cable for video and power supply.
46,95 DKK
Adapter cable, suitable for camera modules TVCCD-40MC and TVCCD-30MP. 1.75m cable for video and power supply.
46,95 DKK
Control module and remote control, for colour cameras by SANYO. Enables the adjustment of all menu functions of the on-screen menu via the coaxial cable. After finishing the remote adjustments the unit should be disconnected to enable a better picture quality.
- Video output: 1 x BNC
- Camera input: 1 x BNC
- Power supply: 2 x 1.5V battery AA size (not supplied, please order matching batteries, e.g. LR-6 together with this unit) or external power source 3V DC current
- Dimensions: 80x148x38mm
- Weight: 230g
1.299,00 DKK
Adapter cable with integrated microphone, for subsequently upgrading cameras without audio function.
- 60cm adapter cable for power supply, video (BNC), with audio output (RCA)
- Power supply: 12V DC current /10mA via power supply of the camera
129,00 DKK
Transmission unit, for twisted telephone cables and CAT-5 network cables.
- For universal applications as a video transmitter or video receiver
- For free pairs of cables in existing installations
- Cable length for colour signals: up to 400m, cable length for B/W signals: up to 600m
- Cable connection via screw terminals
- 25cm connection cable with BNC plug
- Passive, no power supply required
- Weatherproof version (IP65)
199,00 DKK
Transmission unit, for twisted telephone cables and CAT-5 network cables.
- For the transmission of video signals, voltage signals, and data signals
- For universal applications as a transmitter or receiver
- For free pairs of cables in existing installations
- Cable length for colour signals: up to 300m, cable length for B/W signals: up to 600m
- Cable connection via spring-loaded plug-in terminal
- 25cm connection cable with BNC plug, low-voltage plug, 2 cable ends without connectors, 30V/0.5A max.
- Passive, no power supply required
249,00 DKK
Transmission set, for transmitting signals from a keyboard, VGA, and a mouse via network cables up to a length of 100m.
- Two Cat. 5 network cables (UTP or STP) are required for the transmission of signals from VGA, a keyboard, and a mouse
- Transmitter with 2 x PS/2, 1 x VGA, and 2 x RJ45 connections
- Receiver with 1 x USB, 1x VGA, and 2 x RJ45 connections
- Up to 1,280 x 1,024 pixels at a distance of 65m, larger distances at low resolution
- Supplied with VGA and USB connection cables
- Passive, no power supply required
1.199,00 DKK
Audio transmission set, for Cat. 5 network cables.
- Audio transmission via one pair of wires of a Cat. 5 cable, max. 1,000m
- Transmission range: 20-20,000Hz
- RCA connections
- Cable connection via screw terminals
- Passive, no power supply required
229,00 DKK
Surge protector, with BNC jacks.
- For video coaxial cables
- Response time: 100ns
- Max. surge voltage: 4kV
- Metal housing
- With 40cm ground wire
- Dimensions: 25x25x68mm
In order to allow for a perfect protection, one surge protector module must be fitted to each end of the cable.
219,00 DKK
Surge protector, with screw terminals.
- For twisted 2-wire leads
- Response time: 100ns
- Max. surge voltage: 4kV
- Metal housing
- With 40cm ground wire
- Dimensions: 25x25x68mm
In order to allow for a perfect protection, one surge protector module must be fitted to each end of the cable.
189,00 DKK
4-channel transmission unit, for twisted telephone cables and CAT-5 network cables.
- For universal applications as a video transmitter or video receiver
- For free pairs of cables in existing installations
- Cable length for colour signals: up to 400m, cable length for B/W signals: up to 600m
- Cable connection optionally via RJ45 jack or spring-loaded plug-in terminal
- 4 BNC connection jacks
- Passive, no power supply required
- Supplied in a metal housing
- Dimensions: 110x26x78mm
449,00 DKK
18m combined video cable, with moulded plugs for simultaneously connecting video signals and power supply to a CCTV camera.
- 1 x BNC plug on each end for video connection
- 1 x low-voltage plug/low-voltage inline jack Ø 5.5/2.1mm, each, for the connection of a PSU
Especially suitable for the connection of the camera TVCCD-150SET to the digital recorder from the DMR-150SET.
129,00 DKK
Video isolation transformer, 75?, for DC separation of unbalanced video signals.
- High-quality version
- Wide bandwidth
- High linearity
- Insulated BNC jacks
- Dimensions: 55x85x30mm
- Weight: 95g
1.799,00 DKK
Video VGA converter, for connecting one camera or one digital recorder to a TFT or CRT computer monitor with VGA connection.
- Full screen video display
- Brightness, contrast, colour, picture sharpness, resolution and frequency can be adjusted via on-screen menu (OSD)
- Additional BNC video output
- Supplied with PSU and VGA connection cable
789,00 DKK
Video VGA converter, for the connection of cameras, digital recorders and video recorders, DVD players, and games consoles to a PC monitor.
- Suitable for TFT and CRT monitors with VGA connection
- Automatic NTSC/PAL recognition
- Full screen video display
- Brightness, contrast, colour, picture sharpness, resolution, frequency, and video source can be adjusted via on-screen menu (OSD)
- VGA feed-through input for PC, switchable
- Supplied with PSU, VGA connection cable, and 3.5mm audio cable
1.149,00 DKK
